CaaS

How hotels and resorts can cut cooling costs without hurting guest comfort

3 Nov 2026
Guide
How hotels and resorts can cut cooling costs without hurting guest comfort

2 min read

For hotels and resorts in Thailand, air-conditioning runs every day of the year, and the chiller plant is often the largest single electricity load. Every baht saved goes straight to gross operating profit (GOP). The challenge is to save without guests ever noticing.

Why hotel cooling wastes energy

  • Occupancy swings: check-in waves, events and quiet nights create large changes in load.
  • Fixed setpoints: plants are often run the same way day and night, all year.
  • Oversized plants: designed for peak occupancy on the hottest day, they spend most hours at inefficient part load.
  • Humidity: coastal and tropical humidity means dehumidification is part of the load.
  • Empty spaces: ballrooms, meeting rooms and unsold rooms cooled as if occupied.

Operational measures

  • Link guest-room cooling to occupancy, for example through key-card or room-management systems.
  • Pre-cool and set back function rooms to the event calendar.
  • Reset chilled-water temperatures with load and humidity, inside agreed comfort limits.
  • Run the right number of chillers for the load, and keep condenser water as cool as practical.
  • Keep coils, filters and condenser tubes clean.

Plant-level improvements

  • Variable-speed drives on pumps and cooling-tower fans.
  • Plant-wide optimisation that sets chillers, pumps and towers together against occupancy and weather forecasts.
  • Heat recovery where hot-water demand (laundry, kitchens, guest rooms) can use heat rejected by the chillers.
  • Replacing old, inefficient chillers with a correctly sized modern plant.

Keep comfort as a hard limit

Guest satisfaction comes first. Agree comfort limits (temperature and humidity) up front and treat them as constraints the plant must always meet, with monitoring and alarms when they are approached.

Measure the savings

Owners and management companies want proof. Savings should be measured against an agreed baseline, in line with IPMVP, and reported monthly, adjusted for occupancy and weather so that a busy month is compared fairly.

Without capital spending

With Cooling-as-a-Service, Infinity CoolMaster funds, installs, owns and operates the plant, optimises it with our machine-learning CPMS within agreed comfort limits, and guarantees a minimum 10% energy saving in writing. The free audit covers 12 months of bills and a survey of your plant.

ShareLINELinkedInFacebook