Technology

Variable speed drives in chiller plants: where they save and where they do not

11 Nov 2026
Technical
Variable speed drives in chiller plants: where they save and where they do not

1 min read

A variable speed drive (VSD) changes motor speed to match the load instead of running flat out and throttling. Because most chiller plants spend most of the year at part load, drives are one of the most effective efficiency measures, when they are applied and controlled properly.

The physics in one line

For pumps and fans, flow is proportional to speed, but power is proportional to speed cubed. In an ideal system, running at 80% speed needs about half the power, and 50% speed needs about one eighth.

Where drives pay

  • Chilled water pumps: slow down as valves close and the building needs less flow.
  • Condenser water pumps: reduce flow at low load, within the chiller's minimum.
  • Cooling tower fans: modulate instead of cycling on and off.
  • Chillers: variable-speed compressors are much more efficient at part load and when condenser water is cool.

Where savings are smaller than expected

  • Systems with high static head, where the cube law does not fully apply.
  • Pumps that are already correctly sized and run near full flow all year.
  • Plants where a drive is installed but left at a fixed speed. A drive saves nothing without a control strategy.

Things to get right

  • Minimum flow through each chiller's evaporator and condenser must always be protected.
  • Differential pressure setpoints should be reset to the lowest value that satisfies the building, not fixed at commissioning values.
  • Harmonics, motor suitability and cable lengths need checking on retrofits.
  • Drives interact: slowing condenser pumps or tower fans saves their energy but raises chiller energy. The right balance changes with load and weather.

That interaction is why plant-level optimisation matters. Our CPMS adjusts speeds across chillers, pumps and towers together to minimise total plant kW/TR.

ShareLINELinkedInFacebook