Technology

Refrigerant phase-down: what it means for older chillers in Thailand

5 Nov 2026
Technical
Refrigerant phase-down: what it means for older chillers in Thailand

1 min read

Refrigerants are the working fluid inside every chiller. International agreements are steadily removing the ones that damage the ozone layer or heat the climate, and that affects how long older chillers can economically keep running.

R-22 and other HCFCs

R-22 (HCFC-22) was the standard refrigerant in older chillers. Under the Montreal Protocol, developing countries including Thailand are phasing out HCFCs, with consumption almost entirely eliminated by 2030 and only a small servicing allowance after that. As supply shrinks, recharging an R-22 chiller after a leak becomes harder and more expensive.

HFCs and the Kigali Amendment

HFC refrigerants such as R-134a and R-410A replaced HCFCs. They do not harm the ozone layer but have a high global-warming potential. The Kigali Amendment to the Montreal Protocol phases them down. Thailand ratified it on 3 April 2024 and committed to cut HFC production and consumption by 80% by 2045.

What it means for a chiller owner

  • An old R-22 chiller is on borrowed time: plan replacement before a major leak forces it.
  • New plants should use refrigerants with a long future, such as lower-GWP HFO blends or natural refrigerants where suitable.
  • Leak prevention, detection and records matter more each year.
  • Refrigerant recovery and disposal must be handled correctly when a chiller is replaced.

Choosing a refrigerant for a new plant

  • Ask each supplier for the refrigerant’s GWP and its expected availability over the plant’s life.
  • Compare efficiency at part load, not just full load.
  • Check local service capability for the refrigerant and equipment you choose.

Replacing without capital spending

Under Cooling-as-a-Service, Infinity CoolMaster funds and installs a new high-efficiency plant on a refrigerant chosen for the long term, recovers the old refrigerant properly, and operates the plant with a minimum 10% energy saving guaranteed in writing.

Sources

ShareLINELinkedInFacebook