News

Our first Cooling-as-a-Service plant enters commissioning

3 Nov 2026
Company News
Our first Cooling-as-a-Service plant enters commissioning

2 min read

Infinity CoolMaster’s first Cooling-as-a-Service chiller plant, at a plastics factory in Nikhom Phatthana, Rayong, is in testing and commissioning in November 2026. The client is Platinum Pro Plastic, a Thai plastic injection-moulding manufacturer of pallets, crates, bins and OEM/ODM parts, with its factory in Rayong. Under the contract, Infinity CoolMaster funds, installs, owns and operates the plant; the client pays for efficient cooling, with a minimum energy saving guaranteed in writing.

What testing and commissioning means

Commissioning is the stage between installation and normal operation. Every chiller, pump, cooling tower, control and meter is checked against its design: flows, temperatures, safety trips, control sequences and alarms. The plant is then run under real production load before it is handed over for day-to-day operation.

About the client

According to its website, Platinum Pro Plastic Co., Ltd. runs more than 100 injection-moulding machines from 75 to 3,150 tonnes, with a production capacity of over 28,000 tonnes a year, at its factory in Nikhom Phatthana, Rayong. It is certified to ISO 9001:2015 and ISO 14001:2015, and supplies plastic pallets, crates, bins and custom-made parts to industries including food and beverage, paper, electronics, electrical equipment, chemicals and pharmaceuticals.

At that scale, cooling is a production utility: every injection-moulding machine depends on chilled water to cool its moulds and hydraulic systems.

How the savings will be measured

The saving is not estimated; it is measured. The approach follows the International Performance Measurement and Verification Protocol (IPMVP):

  • A baseline is agreed with the client, built from the old plant's energy use and the factory's operating data.
  • Because a factory's cooling load follows production, the baseline is adjusted for production volume and outdoor conditions.
  • The new plant is metered continuously: electricity for every component, and the cooling it delivers.
  • Every month, actual energy use is compared with the adjusted baseline, and the verified saving is reported to the client.

Why a plastics factory

In plastic injection moulding, the process behind products such as pallets, crates and bins, chilled water cools the moulds and machines, so cooling affects both the energy bill and product quality: stable mould temperatures mean consistent parts and cycle times. That makes reliable, efficient cooling a production issue, not only a utility cost. Our guide to process cooling in plastics plants explains this in more detail.

What comes next

  • Handover from commissioning to normal operation.
  • The first monthly measurement and verification reports.
  • Publication of the verified results on this website, as a full case study, once enough months of data are in and the client has approved the text.

We will update this page as the project progresses. If you run a factory, hotel, hospital, mall, office building or data center and want to know what your plant could save, request a free cooling audit.

ShareLINELinkedInFacebook