2 min read
Chillers are built to last many years, but they do not fail all at once. They get gradually less efficient and less reliable, and the cost of keeping them running creeps up. These are the signs that it is time to plan a replacement.
If the plant uses more electricity for the same cooling (its kW/TR is creeping up) even after maintenance, the equipment is losing efficiency. Compare annual average kW/TR year on year.
More trips, alarms and urgent repairs mean rising maintenance cost and rising risk. For hospitals, data centers and hotels, an unplanned outage costs far more than the repair.
When the manufacturer stops supporting a model, parts become slow and expensive. Long lead times turn small faults into long outages.
Older chillers may run on refrigerants under international phase-down or phase-out schedules. Recharging them gets harder and more expensive, and leaks become a compliance issue.
Buildings change: new tenants, extensions, more IT equipment, or lower loads after efficiency upgrades. An oversized plant wastes energy at part load; an undersized one cannot hold comfort on hot days.
Warm zones, humidity problems or slow recovery in the afternoon often point to a plant that can no longer deliver its design performance.
When major overhauls, compressor rebuilds or new cooling towers are on the budget, compare that spend with a full replacement. Repairs often only buy time.
A free cooling audit tells you how close your plant is to the end of its life and what a replacement would save.