Technology

Water-cooled vs air-cooled chillers: which suits your building?

3 Nov 2026
Technical
Water-cooled vs air-cooled chillers: which suits your building?

2 min read

Every chiller rejects heat. The difference between the two main types is where that heat goes: water-cooled chillers reject it through condenser water and cooling towers, air-cooled chillers reject it directly to outdoor air through fans and coils. The choice affects efficiency, space, water use and maintenance for the life of the plant.

How they work

  • Water-cooled: a condenser-water loop carries heat from the chiller to cooling towers, where evaporation removes it. Needs condenser pumps, towers and water treatment.
  • Air-cooled: fans blow outdoor air across the condenser coils. A self-contained unit, usually on a roof or at ground level.

Efficiency

Water-cooled plants are usually more efficient, especially in hot climates, because evaporative cooling lets the condenser run cooler than outdoor air temperature. In Thailand's heat this gap is significant for large plants that run many hours a year. Air-cooled efficiency falls as outdoor temperature rises, which is exactly when cooling demand peaks.

Space and installation

  • Air-cooled chillers need outdoor space with good airflow but no plant room or towers.
  • Water-cooled chillers sit indoors in a plant room and need space for cooling towers, pumps and pipework.

Water use and treatment

Cooling towers consume water through evaporation and blowdown, and need continuous water treatment to prevent scale, corrosion and biological growth. Air-cooled chillers use no water for heat rejection.

Maintenance

Water-cooled plants have more components: towers, condenser pumps, water treatment and condenser-tube cleaning. Air-cooled units need coil cleaning and fan maintenance, and coils in coastal or dusty locations need extra care.

Which to choose

  • Large, long-running loads (malls, hospitals, hotels, office towers, data centers): water-cooled plants usually give the lowest lifetime cost.
  • Smaller buildings, sites without space for towers, or where water is scarce: air-cooled can be the better fit.
  • Mixed approaches exist, for example an air-cooled unit for small night loads alongside a water-cooled main plant.

Decide on lifetime cost

Purchase price is only part of the comparison. Add energy, water, chemicals and maintenance over the expected life. Infinity CoolMaster's free audit compares the options for your building, and under Cooling-as-a-Service we fund and run whichever plant gives the best guaranteed result, with a minimum 10% saving written into the contract.

ShareLINELinkedInFacebook